Spearhead Star-Cut
910/1210
Setting Up Your Machine – Level Front To Rear
When the machine is
attached to the tractor and
set at working height, the
front of the skid should be
10-20mm higher than the
rear of the skid. This
should be measured via
the front & rear of a wing
hinge pin.
To raise the front of the mower
shorten the adjustable links that
are attached to the rear axle.
To lower the front of the mower,
lengthen the adjustable link.
+10
mm
Adjusting the link is made
much easier by placing the
machine’s weight on the
parking stands then gently
lower the machine until the
weight is off the hitch
14
