Spearhead Star-Cut
910/1210
Service & Maintenance
Safety First
•
Never leave the tractor seat without first disengaging the PTO and
stopping the engine.
•
Ensure all rotating parts have stopped turning.
•
Never attempt any repairs, maintenance, service or any other checks
with the machine carried on the tractor hydraulics.
•
Always fully lower to the ground, or securely prop the machine on
substantial servicing stands.
•
Always replace all guards and retaining chains after
servicing/maintenance completed.
It is imperative that the following checks are carried out in order not to
invalidate your warranty; these are carried out
before the first operation,
after the first hour, then after 4 hours.
These checks are:
1. Wheel nuts and tyre pressure (40PSI).
2. Gearbox bolts, including the splitter box.
3. Retaining bolts on the drive shafts.
4. Grease all points including drive shaft tubes.
5. After the first 50 hours drain and replace the gearbox oil.
Replace with EP90 gear oil.
6.
All other nuts and bolts.
910
1210
22