Spearhead Star-Cut
910/1210
Operation
Whilst operating it is possible to continue working when turning as the Star-Cut 1210
is fitted with a constant velocity joint on PTO shaft. However take care not to run the
rear tractor wheel against the mower drawbar as this will result in serious damage to
the tractor, the mower and, in particular, the PTO shaft.
The constant velocity joint on the input PTO shaft, allows the PTO to be left in gear
whilst turning out of work, e.g. on the headlands.
It is important not to turn sharply
when the machine is in work as this will over-load and shorten the life of the
wide angle joint.
When operating in confined areas it is possible to cut going backwards, but it is
advisable to raise the machine, particularly if in scrub, where there is the risk of
hitting hidden solid obstacles obscured by dense undergrowth.
Always exercise particular care when operating over uneven ground surfaces. Do not
allow the blades and blade holder to frequently hit the ground.
Do not allow debris to build upon the cutting decks in dry conditions, as this can be a
fire hazard, in wet conditions it will place unnecessary strain on the machine and may
foul the drive shaft causing damage.
Warning
Do not run the machine with the wings raised,
serious damage will result to the drive lines
and gearboxes.
18
