Spearhead Star-Cut
910/1210
Servicing & Maintenance
Daily
•
Grease all points, including rear axle pivot points (Fig. 9a), axle hinge (Fig.
9c), wheel arms (Fig. 9b), and front draw bar pivot (Fig. 9f)
•
Check bolts are tight on all gearboxes.
•
Check condition of blades and blade bushes; ensure all retaining bolts are
fully tight.
•
Check wheel nuts are tight.
•
Check tyre pressures – 40 PSI.
•
Check gearbox oil, replenish with EP90 gear oil as necessary to the correct
level line on the dipsticks, provided with each gearbox.
Fig. 9 Greasing Points
A Rear axle pivot points - grease points
6 off
B Wheel arm grease points
6 off
C Drive shafts c/w slip clutch
7 off
D Front drawbar grease points
2 off
E Wheel bearings
12 off
F Gearbox pivot
2 off
G Input PTO
1 off
A
B
C
D
E
F
G
23