Spartherm Arte 1Vh, Installation Instructions Manual

Page: 3 / 28

GB 3
OVERVIEW INSTALLATION INSTRUCTIONS // SPARTHERM FIREPLACE INSERTS
1. General notes 4
1.1. Certified quality 4
1.2. Installation steps 5
2. Basic requirements for setting up an open fireplace 5
3. Locations and combustion air supply 6
3.1. Basic requirements of locations for open fireplaces and prohibited
locations 6
3.2. The operation of open fireplaces is not hazardous if 6
3.3. Open fireplaces may not be installed 6
3.4. Combustion air supply 6
3.5. Combustion air flue 7
4. Cutoff device in the vent 7
4.1. Throttle device 7
5. Fire prevention in front of the combustion chamber opening 7
5.1. Floors 7
5.1.1. Special precautions for fire protection of floor coverings near the
fireplace 8
5.2. Load-bearing structural elements made of concrete and reinforced
concrete 9
5.3. Wooden beams 9
5.4. Insulation layers 9
5.2.1. Special measures for fire prevention or adjacent, combustible
structural elements 9
5.4.1. Thermal insulation material thickness 10
5.4.2. Stud wall for walls that need protection 10
5.6. Flexible grouting between facing and insert 10
5.7. Fireplace hood 10
5.8. Connection piece 11
5.9. Heat dissipation 11
5.5. Special measure for fire prevention for hardwood mantels 11
5.9.1. Warm air heating systems 12
5.9.2 Closed fireplace units 12
6. General installation notes 13
7. Special fire prevention measures 13
8. Cleaning open fireplaces 14
9. Special notes for Spartherm fireplace inserts 14
9.1. Flue gas neck tube 14
9.2. Spartherm fireplace insert with sliding door 14
9.3. Carrying aids 14
10. Technical data for fireplace insert 15