26
ATTENTION!
Ensure that the spraying nozzle does not leave the drain while spraying .
Water under high pressure may cause severe injury .
STOP SPRAYING
Depress the
high pressure button
(35) to shut the high pressure valve .
• The
high pressure LED
(33) extinguishes .
•
High Pressure Off
appears on the eController display for 2 seconds .
• Water spray at hose nozzle stops .
• Engine RPM decreases .
• Close the
high pressure valve
(7) .
CARE OF THE HP HOSE
• Always clean the hose after use .
• Ensure there are no sharp objects near the hose .
• Ensure vehicles do not cross over the hose .
IMPORTANT!
Rewind hose onto reel under pressure to avoid crushing . If machine has run out
of water, ensure hose is unwound before pressurizing .
COLD WEATHER OPERATION
Your high-pressure device may freeze up in cold weather and temperatures below 32°F . A number of safety precautions must be taken .
Additional preparations before departure:
1 . Drain the water tank by opening the drain valve .
2 . When all the water has been removed or drained, remove the water filter .
3 . Clean the filter and mount it in opposite order .
4 . Close the drain valve .
5 . Remove the nozzle/gun from the HP hose .
6 . Antifreeze unit with optional Antifreeze System .
Operating Instructions
33
35
