13
NAVIGATION BULLETS
The navigation bullets have two general states:
Passive (gray)
Active (blue)
Depending on the user’s location in the menu, one bullet is on display, or in the case of a pop-up eController error, all navigation bullets
disappear .
(See page 27,
eController Errors
, for a list of pop-up displays.)
Features in navigation bullets are in specified order, if applicable:
The
Error
navigation icon is only visible and can
be navigated when an error is applicable .
The
Home
navigation icon is the default position
and normally displays engine run time and HP
hose counter .
ECONTROLLER FUNCTIONS
When the eController is set to
HP Hose Reel
the LCD displays the
hose position and the up/down control positions . The hose reel is
actuated by rotating the Navigator dial clockwise to select
down
and
counter clockwise to select
up
. Depress the Navigator dial to select
the action .
The speed of the hydraulic drive using the eController is controlled
by adjusting the speed control unit which throttles the hydraulic flow
to the reel drive hydraulic motor .
(See page 21,
Rewind Hose Using
Hydraulic Reel
.)
Hydraulic Speed Control
HP Hose Reel Mode
Description—Controls
Error
Home
HP Hose
Reel
Management
When the eController is set to Management Mode, the LCD displays a menu of three functions that can
be selected by rotating the Navigator dial and activated by depressing the navigation knob .
• Software Version
displays the current version of the controller software .
• Service Interval
displays the days and run hours until maintenance is required .
• Hose Counter
displays the length of hose off the HP hose reel .
Management Mode
