19
CHECK BEFORE DEPARTURE
Before you drive away with the vehicle, check the following:
1 . The high-pressure hose has been inserted into the hose holder (5) and secured with
the locking pin .
2 . The high-pressure hose reel is locked with the clutch engaged (30)
(see page 21)
and the manual hydraulic hose reel control lever is in the neutral position, or the
eController is not in Hose Reel mode .
(See page 21,
Hydraulic Hose Reel Control
, for
more information.)
The HP reel swing arm is locked in place with latch .
3 . The supply hose is connected to the supply hose holder (19) . The supply hose reel is
locked by means of the reel locking device (15) .
4 . If temperatures are below freezing, the water tank should be emptied and the piping
system drained and flushed with antifreeze .
(See page 25,
Cold Weather Operation
, for
more information.)
5 . The vehicle is now ready for departure .
PLACEMENT OF URBAN WARRIOR
1 . Put the vehicle at the desired location and set the parking brake .
2 . Block the tires if using on an incline or uneven surface .
3 . Mark the working area by establishing barriers to prevent inadvertent access to the
work area .
PRIOR TO STARTING THE URBAN WARRIOR
1 . Ensure there is adequate fuel in the fuel tank (22) for the intended task .
2 . Ensure the water filter (9) is clean . Clean the filter, if necessary .
3 . Check that the supply valve (16) to the water filter is open .
4 . Check that the high-pressure valve (7) at the HP hose reel is closed .
5 . Fill the water tank via the supply pipe (8) or the supply hose .
(The maximum water temperature is 55°C.)
6 . Loosen the control wheel of the pressure regulator (11)
(rotate
counter-clockwise)
.
7 . Attach the jetting
nozzle onto the
high-pressure hose .
5
15
19
22
7
16
9
11
8
Mechanical Operation
