22
HYDRAULIC REEL CONTROL
The hydraulic control lever is spring loaded to default to the
Neutral
Position
(A) where the hose reel is locked by the hydraulic actuator .
• Pushing the control lever
up
(position B) will actuate the hydraulic
motor to wind the hose onto the reel .
• Pushing the control lever
down
(position C) will actuate the hydraulic
motor to unwind the hose off the reel .
• Due to the proportional functioning of this valve you can control the
speed of the reel by movement of the lever away from the
center
position
(A) .
• Pushing the control level into
position D
, (a maintaining position) will
allow the hose reel to move without the aid of the hydraulic motor . This
allows the hose to unwind as the high pressure hose nozzle works its
way through a drain line .
A
clutch assembly
(30) on the HP hose reel drive unit can be disengaged to
allow the hose reel to free wheel for pulling the hose off the reel manually .
The
hydraulic speed control knob
(26) can be adjusted to control
the range of speed when using the hydraulic reel control lever . (This feature
is only available on model equipped with the 9-channel remote .)
30
WARNING!
Never block the Hydraulic Hose Reel lever and always control it with one hand while
guiding the high-pressure hose by means of the hose guide .
HIGH PRESSURE HOSE GUIDE
The purpose of the
High-Pressure Hose Guide
(6) is to guide the HP hose
onto and off of the hose reel .
• Put the end of the HP hose through the opening of the hose guide (6) .
• Moving the hose guide right and left guides the hose evenly on the
hose reel .
6
Mechanical Operation
D
B
A
C
(if equipped)
26
For 5-channel remote with
manual hydraulic valve
9-channel remote
