PAGE 15
Notched ends are orientated to the
both edges of the rear panel
REAR WALL PANEL
Lay the wall panels out with the large rib
overlapping the small.
1
2
Screw the wall panels in the centre
of the rib as shown.
Overlap top and bottom channel by 130mm. Fit the top and bottom
channel to the wall panels. Ensure the holes in the channels are inline with
holes in the rib of the sheeting. Make sure the small flange on the
channel
positioned outside face of the sheeting.
Outside
Ensure that the small lip
of the channel is to the
outside of the shed.
Wall
Sheet
Channel
Large Rib
Small Rib
“D” - Wall Corner Panel
Out side of shed
In side of Shed
Notched ends are orientated to the inside of the shed
130
15
m
m
m
m
130
Required to manipulate sheeting panel to align the channel holes
Summary of Contents for Fasttrak WorkShop 2010
Page 20: ...PAGE 20 FRONT WALL PANEL ...
Page 44: ...NOTES PAGE 44 ...
