Spanbilt Fasttrak WorkShop 2010, Assembly Instructions Manual

Page: 21 / 48

GABLE WALL PANELS
Lay the wall panels out with the large rib
overlapping the small.
1
Screw the wall panels in the centre
of the rib as shown.
Notched ends are orientated to the
outer edges of the panel
2
Outside
Ensure that the small lip
of the channel is to the
outside of the shed.
Wall
Sheet
Channel
Large Rib Small Rib
If you are having trouble
screwing the channel to
the sheets, chock behind
the hole .
PAGE 21
A1
A6
A5
A4 A3 A2
A7 A8
O
P
B1
B6
B5 B4 B3 B2 B7
B8
Left Gable Panel Labels, A B Right Gable Panel Labels
N
N
Overlap bottom channel by 130mm. Fit the top and bottom channel to the
wall panels. Ensure the channel is flush with the edge of the sheets. Do
not screw the ends of the channel to the sheets at this point.
Make sure to assemble all panel “A” together for left wall and “B” for right.