FIT THE REAR & SIDE WALL
PAGE 26
Similarly fix all the 8 corners using brackets. It is very
important to keep the all 4 panels square to each other.
On top side of the shed, use 5 Screws to fix the bracket
on the top channels. total of 11 screws per bracket.
Pre drill on channel through the bracket holes
Fix the Screws through bracket, channel and
sheeting where ever possible as shown here.
Now Lift the other side wall panel and screw to the rear wall panel using the bracket.
Details shown top of this page.
It is required to remove one gable side screws later
when you fix the roof angle trim and fix again with trim
Screw the wall panels together at the
base and top as shown.
1
2
Make sure the panels are perfect square before
fixing with bracket
Remove previously fixed corner screw from both
the panels now to fix the brackets.
Summary of Contents for Fasttrak WorkShop 2010
Page 20: ...PAGE 20 FRONT WALL PANEL ...
Page 44: ...NOTES PAGE 44 ...
