![background image](http://html.mh-extra.com/html/spacewalker/hot-255/hot-255_user-manual_1339191063.webp)
63
ERROR MESSAGES
Error:
AudioPCI™ DOS driver is not loaded.
In MS-DOS Mode the MS-DOS driver, APINIT.COM, must be suc-
cessfully loaded for the utility to work.
Error:
AudioPCI™ Windows driver is not loaded.
The Windows 95 driver, EAPCI.VXD, must be successfully loaded
for the utility to work.
APMIXER.EXE
Error:
PCI BIOS detect failed; <PCI BIOS-specific error message>.
Error:
PCI device detect failed; <PCI BIOS-specific error message>.
These will occur if a PCI BIOS was not detected or if the PCI BIOS
cannot locate our card in the system. They are both followed by PCI
BIOS-specific error messages, which are described starting on page
64.
Error:
BLASTER environment variable missing or incorrect.
This message will occur if the BLASTER environment variable was
not properly set. Make sure the “Enable Legacy Emulation” box is
checked on the Settings tab of the AudioPCI™ Device Properties
window.
Error:
SNDSCAPE environment variable not found.
This message will occur if the SNDSCAPE environment variable
was not set. Make sure the “Enable Legacy Emulation” box is
checked on the Settings tab of the AudioPCI™ Device Properties
window.
Error:
Cannot read config file, SNDSCAPE.INI.
This will occur if the SNDSCAPE.INI file, pointed to by the
SNDSCAPE environment variable, cannot be found. Download and
install the latest AudioPCI™ drivers.
Error:
Config file is incomplete.
SNDSCAPE.INI entries are missing. This message is followed by
the name of the missing entry, i.e. SBPort. Download and install the
latest AudioPCI™ drivers.
Error:
Config contains an invalid value.
SNDSCAPE.INI entry has a bad value. This message is followed by
the name of the missing entry and its value, i.e. SBPort 592 (250
HEX). Download and install the latest AudioPCI™ drivers.