33
INSTALLING AUDIOPCI
TM
SOFTWARE
Configuring the ENSONIQ AudioPCI™
All the settings for the AudioPCI™ can be adjusted from the ENSONIQ
AudioPCI™ driver settings window. To open the settings window follow
this procedure:
1.
Open the Program Manager, then double-click the Control Panel
icon in the Main group.
2.
Double-click the Drivers icon in the Control Panel window.
3.
Select “Audio for ENSONIQ AudioPCI™” and click
Settings…
4.
Click
OK
to close all open windows if changes are made.
ENSONIQ Soundscape Emulation
The resources listed in the Soundscape Emulation section are used by ap-
plications that have native ENSONIQ Soundscape driver support.
Sound Blaster Emulation
The resources listed in this section determine the BLASTER environment
variable settings for those applications that have support for Sound Blaster
or Sound Blaster Pro.
Legacy Emulation
If this box is unchecked the AudioPCI™ will be disabled in MS-DOS Mode.
Only native Windows 3.x applications will be able to use the AudioPCI™
for sound.
Joystick
Check the “Joystick Enabled” box if you intend to use the AudioPCI™
joystick port. Uncheck this box if you are using a separate game card for
your joystick.
Microphone BIAS
If the “Microphone BIAS” box is checked 5-volt BIAS power will be ap-
plied to the Mic Input port. This is necessary for electret condenser micro-
phones to function. Uncheck this box when using a dynamic microphone.
MS-DOS Mode and MS-DOS Prompt do not have microphone support.
