62
ERROR MESSAGES
Error:
BLASTER environment variable missing or incorrect.
This message will occur if the BLASTER environment variable was
not properly set. Make sure the “Enable Legacy Emulation” box is
checked on the Settings tab of the AudioPCI™ Device Properties
window.
Error:
Invalid parameters.
Error:
Config pointer out of range.
Error:
ENSONIQ AudioPCI™ tag not found.
Any of these three errors can occur if a user invokes APCONFIG.EXE
directly with arguments that are invalid. If the user is going to in-
voke this program (in order to view the AudioPCI™ hardware and
legacy settings), no arguments (parameters) should be entered on
the command line.
Error:
SNDSCAPE environment variable not found.
This will occur if the SNDSCAPE environment variable is not set in
the AUTOEXEC.BAT file. Make sure the “Enable Legacy Emula-
tion” box is checked on the Settings tab of the AudioPCI™ Device
Properties window.
Error:
Cannot read config file,
SNDSCAPE.INI
.
This will occur if the SNDSCAPE.INI file, pointed to by the
SNDSCAPE environment variable, cannot be found. Download and
install the latest AudioPCI™ drivers.
Error:
Config file is incomplete.
SNDSCAPE.INI entries are missing. This message is followed by
the name of the missing entry, i.e. SBPort. Download and install the
latest AudioPCI™ drivers.
Error:
Config contains an invalid value.
SNDSCAPE.INI entry has a bad value. This message is followed by
the name of the missing entry and its value, i.e. SBPort 592 (250
HEX). Download and install the latest AudioPCI™ drivers.
MT32.EXE
Error:
<Option> is an invalid option.
Bad parameter on command line. This will be followed by a usage
message. See “MT32.EXE” on page 47.
