Form No. 43539500
–
8
–
July 2021 A
STEP 6: Attach the manifold support bracket to the rim of the canopy using the U-bolt, (2) 1/4-20 hex nuts,
flat washers and stand-off plate. NOTE: DO NOT COMPLETELY TIGHTEN FASTENERS AT THIS STAGE YET.
STEP 7: Open the swivel clamp located on the burner by carefully lifting the clamp over the latch. Place the
orifice fitting into the slotted portion of the burner and latch in position by engaging the swivel clamp over the
latch. *
*Note: For natural gas versions see STEP 10.
