SP Controls PixiePro PX2-MP-IR, Installation Manual

Page: 24 / 31

Configuration Setting Descriptions
Group 1 - Core Functions
Core­function­settings­determine­behavior­of­PixiePro.­
Setting 1 - Multiple-Device TCM Mode (toggle)­
Enable­this­setting­to­allow­the­TCM­to­control­multiple­devices.­Disable­to­always­control­a­single
device­with­the­TCM­module.­­See­
Section IX Operation for­more­information.
Default:­Enabled­(Multiple-Device­Mode)­
Setting 2 - “Device 0” on TCM in Multiple-Device Mode (toggle)­
The­TCM­may­switch­to­a­device­0­profile­when­the­currently­selected­Source­button­is­pressed
again.­This­allows­users­to­always­access­a­desired­code­set­regardless­of­which­source­is­currently
selected.­See­
Programming the Transport Control/Menu Module on­page­15­for­more­information.­
Default:­Disabled­
Setting 3 - Input Selection Lights on TCM Persist in Single-Device Mode (toggle)
When­the­TCM­on­the­PixiePro­has­been­configured­to­be­in­Single-Device­mode,­enabling­this­set-
ting­will­cause­the­most­recently­pressed­input­selection­light­to­become­brighter­after­being
pressed.­Having­this­setting­disabled­will­cause­the­lighting­on­the­input­selection­buttons­to­remain
constant­while­in­Single-Device­mode,­regardless­of­which­button­was­most­recently­pressed.
Default: Disabled
Setting 4 - Defeat In-Progress Macro on Button Press (toggle)
When­enabled,­pressing­a­button­while­the­PixiePro­is­in­the­process­of­sending­a­macro­will­dis-
card­the­remainder­of­the­macro­being­sent­and­send­the­new­code.­When­disabled,­buttons
pressed­while­the­PixiePro­is­sending­a­macro­will­have­no­effect.
Default: Disabled
Setting 5 - Fixed-Length Code Learning (range­of­0-0­through­3-7,­0-0­is­lowest­setting)
When­the­PixiePro­learns­a­code,­this­value­determines­how­many­repetitions­of­the­code­the
PixiePro­will­record.­When­the­code­is­sent­as­part­of­a­macro,­this­will­determine­the­length­the
PixiePro­will­send­the­code­for­in­a­single­send.­When­the PixiePro­sends­this­button­independently,
this­value­will­not­affect­how­long­it­is­sent,­unless­
Setting 6 is­ enabled .­
Default:­0-1
Setting 6 - Fixed-Length Code Learning Applies to Single-Code Learning (toggle)
When­this­setting­is­enabled,­the­code­duration­recorded­during­learning­(configurable­in­ Setting 6
above)­will­be­the­minimum-length­send­for­any­code.­This­will­prevent­the­user­from­inadvertently
pressing­a­button­for­too­short­a­time­t­o­control­the­device.­
Default:­Enabled
Setting 7 - High-Frequency Carrier Default (toggle)
When­enabled,­the­PixiePro­will­assign­a­455­kHz­carrier­frequency­to­an­IR signal­if­it­does­not
detect­a­carrier­frequency.­SP Controls­recommends­that­this­setting­remain­enabled­(default).
Default: Enabled
21