SP Controls PixiePro PX2-MP-IR, Installation Manual

Page: 29 / 31

IX. Operation
Actively-programmed­buttons­will­glow,­indicating­that­they­are­ready­for­use.­Press­any­button­to
send­the­programmed­IR­command­or­series­of­IR­commands.­
If­the­TCM­on­the­PixiePro­is­configured­to­Multiple-Device­mode,­the­Source button­LED will
remain­lit­after­being­pressed­to­indicate­which­TCM­code­profile­is­active.­When­the­TCM­module­is
configured­to­Single-Device­mode
, the­Source­button­LED­will­glow­briefly­when­pressed,­then
return­to­normal­brightness.­
Note :­The­hourglass­status­LED­will­illuminate­while­codes­are­being­sent.­Some­macros­may­take
several­seconds­to­complete.­
Security
If­ Security is­enabled,­pressing­the­ Power Off button­will­activate­the­lockout­on­the­PixiePro­display.
If­ Security is­ disabled ,­pressing­the­ Power Off button­will­not­change­the­PixiePro­display.­When­the
PixiePro­is­configured­to­security­mode,­the­control­interface­will­lock­immediately­after­the­ Off but-
ton­is­pressed.­While­locked,­the­ Security Lock LED will­glow­red­and­the­PixiePro­display­will­dark-
en.­The­device­will­not­respond­to­any­button­presses­until­unlocked.­
To­unlock­the­PixiePro,­enter­the­appropriate­security­code­using­the­TCM­numerical­keypad­and
press­the­center­button­of­the­circular­keypad­to­accept.­If­the­correct­code­is­entered,­the­security
lock­LED­will­go­out­and­the­PixiePro­will­beep­three­times­and­the­display­will­illuminate.­The­lock
LED­will­darken­and­the­PixiePro­will­respond­to­commands­again.­
If­the­incorrect­code­is­entered,­the­PixiePro­will­emit­a­single­long­beep­and­will­remain­locked.­If
the­PixiePro­is­configured­to­use­the­
Security Retry Lockout Timer (see­page­24­above),­the
PixiePro­will­not­allow­another­attempt­until­the­timer­has­expired.­This­will­discourage­attempts­to
guess­the­key­code­sequence.­
Note :­The­PixiePro­may­be­configured­to­automatically­lock­after­the Automatic Shutdown Timer
expires.­
TCM
The­PixiePro­Transport­Control/Menu­module­(TCM)­may­be­configured­to­control­one­device­or­as
many­as­nine­separate­devices.­For­example,­a­single­PixiePro­TCM­may­be­configured­to­control­a
VCR,­a­DVD­player,­a­CD­player,­and­a­satellite­tuner.­Each­device­control­profile­will­be­activated
when­the­user­selects­the­corresponding­Source­selection­button.­
To­select­device­0,­press­the­currently­selected­device­a­second­time.­Device­0­allows­the­user­to
access­a­code­set­no­matter­which­device­is­selected.­For­example­you­may­program­device­0­with
the­projector­menu­controls,­and­you­will­be­able­to­access­these­commands­no­matter­which
source­is­active.­
When­the­TCM­is­configured­to­control­multiple­devices,­the­TCM­will­control­the­currently­selected
device.­For­example,­when­the­user­presses­Source­1­on­the­PixiePro­interface,­the­TCM­will­switch
to­the­programming­corresponding­to­device­1.­Only­the­buttons­that­have­been­programmed­for
that­device­will­illuminate,­so­the­user­will­always­know­which­commands­are­available.­For­exam-
ple,­when­the­DVD­source­is­selected,­the­DVD­menu­navigation­functions­will­illuminate.­When­the
PixiePro­is­switched­to­the­VCR­source,­the­menu­navigation­functions­will­darken.
26