SP Controls PixiePro PX2-MP-IR, Installation Manual

Page: 17 / 31

To Erase a Single Button
While­in­Learning­Mode,­press­and­hold­a­button­that­has­been­programmed­to­erase­it.­The­button
will­begin­blinking­slowly­to­indicate­that­it­is­going­to­be­erased.­Blinking­will­gradually­quicken­and,
after­several­seconds,­the­button­will­go­dark­and­beep­four­times­to­indicate­that­erasure­is­com-
plete.
To Erase All Buttons on the TCM only
Press­and­hold­any­two­buttons­on­the­PixiePro­TCM­while­the­PixiePro­is­in­Learning­Mode­to
erase­the­TCM­section.­The­TCM­buttons­will­begin­blinking­slowly­to­indicate­that­it­is­going­to­be
erased.­Blinking­will­gradually­quicken­to­
confirm TCM erase .­After­a­few­seconds,­all­buttons­on­the
TCM­will­go­dark­and­the­PixiePro­will­beep­four­times,­indicating­that­the­TCM­has­been­erased.
Once­a­device­or­button­has­been­erased­there­is­no­way­to­un-erase­it.
If­the­PixiePro­is­configured­to­use­Multiple-Device­mode­for­the­TCM,­this­will­erase­the­ last-select-
ed device only .­Any­other­code­sets­programmed­to­the­TCM,­and­codes­programmed­to­the
PixiePro,­will­not­be­erased.
To Erase All Buttons on PixiePro, including all TCM codes
While­in­Learning­Mode,­press­and­hold­any­two­buttons­to­erase­the­entire­device.­If­the­PixiePro­is
configured­to­use­Multiple-Device­mode­for­the­TCM,­at­least­one­of­the­buttons­must­be­outside­of
that­module­to­erase­the­entire­device­(e.g.,­one­of­the­source­buttons­or­power­buttons).­
The­whole­button­pad­will­begin­blinking­slowly­to­indicate­that­it­is­going­to­be­erased.­Blinking­will
gradually­quicken­to­
confirm device erase .­After­a­few­seconds,­all­buttons­will­go­dark­and­the
PixiePro­will­beep­four­times­indicating­that­it­has­been­erased.­All­code­sets­programmed­to­the
TCM­will­be­erased­along­with­the­other­buttons.­Once­the­PixiePro­has­been­erased­there­is­
no
way to un-erase it .­
Configuration­settings­will­not­be­changed­by­device­erase.­
14