SP Controls PixiePro PX2-MP-IR, Installation Manual

Page: 27 / 31

Group 3 - Security
Security­settings­are­used­to­enable­the­secure­mode­on­the­PixiePro,­and­to­modify­the­security
code.
Setting 1 - Enable/Disable Security (toggle)­
Select­this­configuration­option­to­enable­the­security­feature.
Default:­Disabled­
Setting 2 - Lock on Inactivity Shutdown (toggle)­
This­configuration­setting­is­used­when­the­ Automatic Shutdown Timer is­enabled­and­Security­is
Enabled.­Select­ Lock on Inactivity Shutdown and­the­PixiePro­will­enter­security­lockout­after­send-
ing­Power­off­on­the­expiration­of­the­ Automatic Shutdown Timer .
Default:­Enabled
Setting 3 - Enter or Retrieve Security Code
Select­this­configuration­setting­to­enter­or
retrieve­the­PixiePro­configuration­codes.­
When­this­setting­is­selected,­the­TCM­key-
pad­will­display­the­currently-configured
security­code.­The­code­sequence­will­illu-
minate­in­sequence,­each­key­illuminating
for­the­duration­of­a­single­tick.­At­the­end
of­the­code,­the­display­will­darken­for­one
tick.­It­will­then­start­over.­
Press­ Volume Up or Volume Down to­trig-
ger­the­code­learning­sequence.­The­dis-
play­will­prompt­you­to­enter­a­new­code.
Enter­the­key­sequence.­The­key­sequence
must­be­between­
one and six digits in
length .­Press­the­center­display­button­to
indicate­the­end­of­the­code.­
The­power­button­module­will­now­illumi-
nate­and­the­PixiePro­will­begin­displaying
the­new­code.­
You must press any power
button to accept the new security code .
Pressing­any­other­button­will­cause­the­new­security­sequence­to­be­discarded.­
Note : Entering­a­security­code­will­not­automatically­enable­Security­Mode­-­it­must­be­enabled­sep-
arately.­See­ Setting 1 - Security Enable/Disable above­for­more­information.­
For­more­information­on­using­security,­see­ Operation on­page­26­below.­
Default­Security­Code:­1,­2,­3,­4­
24
Security­Code
Buttons­(note­that
they­are­numbered)
Security­Code­Enter
Use­power­and
volume­buttons
to­configure
security­settings
and/or­edit
security­code
Figure 18: Configuring­security­features