86
II. Delete RAID
The following steps shall be taken to delete RAID.
1.
In the menu zone, select
2. Delete RAID
, press
Enter
to
confirm this operation and go to next.
2.
In the validated channel status, use the arrow key to select
the disk array to be deleted and press
Enter
to confirm.
3.
Press
Y
when warned
Are you sure you want to remove
the disk array?
III. Rebuild Mirror Array
The following steps shall be taken to rebuild the mirror array.
1.
In the menu, select
3. Rebuild Mirror Array
, press
Enter
to
confirm.
2.
In the menu, select
1. Select Source Disk: None
and press
Enter
to confirm.
3.
In the validated channel status, select the source disk of the
mirror array and then press
Enter
.
4.
In the menu, select
2. Select Target Disk: None
and press
Enter
to confirm.
5.
In the validated channel status, select the target disk of the
mirror array and then press
Enter
.
6.
In the menu, select
3. Start Duplication Process
and press
Enter
to confirm.
7.
Press
Y
when asked
The last time rebuild not completed.
Continue?
Note:
When there is no RAID 1 array, system will prompt user
No enough
disks
at the second step, and rebuild cannot continue.
IV. Add Spare Disk
The following steps shall be taken to add the spare disk.
1.
In the menu, select
4. Add Spare Disk
and press
Enter
to
confirm.