manualshive.com logo in svg

SOYO SY-P4S DRAGON Ultra, User Manual, Page: 116 / 154

Share
Download
SOYO SY-P4S DRAGON Ultra User Manual Download Page 116

 

112

 

5.  The installation program will prompt users to insert the 

floppy disk of driver. Please insert it and then press 

Enter 

to confirm. 

6. In the follow-on window, select 

HPT370/HPT372 

UDMA/ATA RAID Controller

, then press 

Enter 

to confirm. 

7.  The follow-on interface will list the devices to be installed, 

in which 

HPT370/HPT372 UDMA/ATA RAID Controller 

item should be included. (If users want to install other 
devices, please operate at this time. If all devices have 
been successfully installed, please go to next.) 

8. Press 

Enter 

to continue the installation of Windows NT4.0. 

Install driver during Windows 2000 installation 

1. 

Go to “d:\raid\hpt372\” directory, (assuming that your 
CD-ROM is drive d) copy all the files and directory to a 
floppy disk.

 

2.  If Windows 2000 is installed from the floppy drive, please let 

the installing program run automatically. If Windows 2000 is 
installed from the CD-ROM drive, please 

F6 

key when the 

message 

Press F6 if you need to install third party SCSI 

or RAID driver 

appears. 

3. Press 

S 

key to specify additional devices when the 

Windows 

2000 Setup 

window appears. 

4.  Insert the floppy disk of driver, then press 

Enter 

to continue. 

5. 

The system will ask whether to install driver under 

WinNT 

or 

under 

Windows 2000

, please select to install driver under 

Windows 2000. 

6.  In the follow-on window of device type, please select 

Other 

and press 

Enter 

to continue. 

7.  The follow-on interface will list the devices to be installed, in 

which 

HPT370/HPT372 UDMA/ATA RAID Controller 

item 

should be included (If users want to install other devices, 

Summary of Contents for SY-P4S DRAGON Ultra



























































































































































Reviews:

No comments