TYAN S2420 Manual Download

Page: 1 / 73

Tyan S2420

Tomcat i810ef

Motherboard Users Manual

Revision 1.20

manual may be reproduced or translated without prior written consent from Tyan

Computer Corp.

All registered and unregistered trademarks and company names contained in this

manual are property of their respective companies including, but not limited to the

following.

AMI is a trademark of American Megatrend Incorporated

Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

INTEL, Pentium II/III, Celeron are trademarks of Intel Corporation.

Tomcat i810ef S2420 is a trademark of Tyan Computer Corporation.

Information contained in this publication has been carefully checked for accuracy and

reliability. In no event will Tyan Computer be held liable for any direct or indirect,

incidental or consequential damage, loss of use, loss of data, or other malady resulting

from errors or inaccuracies of information contained in this manual. The information

contained in this document is subject to change without notice.

PRINTED IN USA

Summary of Contents for S2420










































































Search results

Summary of Contents for S2420

Reviews:

Related manuals for S2420

Brands by name

Popular brands

TYAN S2420, Manual

Search results

Summary of Contents for S2420

Reviews:

Related manuals for S2420

Brands by name

Popular brands