OPERATION
B.
In "Man" mode the unit will come up to temperature, the ready light will illuminate, and
the unit will continue to run for as long as unit is in "Man" mode.
C.
In 'Timing" mode, the unit will come up to temperature, the ready light will illuminate,
and the unit will continue to run for the time set, then go into "Idle" mode.
NORMAL OPERATION:
1. "Timed" - The timer may be used to signal an exact cooking time. The timer may be set either
direction (clockwise or counter clockwise). A "Windup" or "Overset" action is not required. When
a set time times out to "O" the Steamer will automatically switch to "Idle" mode. The buzzer will
sound and the Timed Out" light will flash continuously until the door is opened. Choices are:
A. Simply open door and close it (shuts off buzzer and light).
B. Remove, load, and re-load or leave empty.
C. Set a new time on timer.
Time may be re-set during run or set to "Idle" or "Man" mode.
2. "Manual" — This function runs unit full-power continuously.
NORMAL OPERATION:
REVIEW—
P
To conserve water and electricity during "slow" periods, leave timer set to "Idle" mode.
P
Opening the door during a "Set" timing run, "Pauses" the timer. Closing the door resumes
timer with cooking time un-affected.
P
Timer may be turned either clockwise or counter clockwise direction to set.
SHUTOFF:
1. Turn power switch "Off." The unit will drain automatically.
WARNING
BURN HAZARD
When door is being opened, hot steam or hot water may escape from
steamer. Stand back when opening door.
OPERATING INSTRUCTIONS:
1. De-Lime Indicator Light - The "De-Lime" indicator light will illuminate when the unit senses that the
elements need cleaning. Usually a thin layer of deposits are present when this occurs. When the light signaling
the operator that cleaning/de-liming should be performed, see "Cleaning" section for recommended
procedures.
2. If cleaning IS NOT performed, additional mineral deposits may build up on the elements. If this occurs, an
extensive cleaning of the elements and well is required to restore proper operation. Southbend SteamMaster
"De-Sealer" or other non-caustic solutions are recommended. Repeated applications may be necessary to
completely clean the well and elements. Rinse thoroughly with water.
PAGE 8
