Galaxy G2
- 37 -
Serial port Config
This page is allowed to configure the baud rate, odd-even check and the data flow for serial port
(5-pin port) and Bluetooth.
CAUTION: do not change the default value in this page for each item, if you want to
change the settings, please contact with SOUTH technician for further support.
In the dropdown list of data flow, there shows 4 items for selection.
Raw observation data:
This is the raw observation data straight from OEM board.
Correction Data:
This is the correction data straight from OEM board.
Navigation Data:
This is the navigation data output from receiver such as NMEA-0183, GSV,
AVR, RMC and so on. It is configured in Data Flow Config page.
SIC Observation Data:
This is the user-defined format observation data from SOUTH.
OpenSIC Observation Data:
This is the open version of SOUTH user-defined format
observation data for secondary development.
TCP/IP Config
This is used to configured the raw data or navigation data to be uploaded or transferred to a server.
And there are Caster and Server working mode for this performance.
Caster:
If this working mode is selected, GALAXY G2 will be a client to upload the data to a
specify server if it connects to the internet by WIFI or GPRS connection with SIM card inserted.
Input the specified IP and port for server, and the data format what is uploaded. Then users are
able to see the uploaded data on server.
