Galaxy G2
- 30 -
CMR ID/RTCM2.X ID/RTCM3.X ID:
Users can specify the ID for transmitting correction.
Position:
Click this button to capture the coordinates for current position
Spare:
This is used to the repeat station
Base Start Mode:
Here contains 3 methods to start the Base, manually start base, automatically
start base by fixed point, automatically start base by current point.
Correction:
Here contains the global general used correction formats including RTD,RTCM23,
RTCM30, RTCM32, CMR and SCMRx
POP Value:
This value is setup for the PDOP limitation.
Status:
Here will display the status for base in real-time.
Antenna Setup
The antenna parameters are configured in this page including the antenna height, measuring
method.
Antenna Height:
This is the value for height of antenna while surveying.
Measuring Method:
Here provides several methods for measuring the antenna height such as
carrier phase center, slant height, antenna edge, height plate and to the bottom.
