Galaxy G2
- 16 -
Run IE broswer on computer and input the
default IP (
10.1.1.1
)
into address bar, after a while, the
system login interface is refreshed, then apply
“admin”
for username and password to login.
§4.3 Access by USB
On this mode, the Type-C USB port of Galaxy G2 must work as an Ethernet port, then internal
web UI shall be accessed via USB cable connection with computer.
First of all, a corresponding driver is required to install to the computer, then this function could
be activated.
Due to different operating system is installed on computer, the drivers should be applied to a
suitable one. The file
bugvista64.inf
is applied to 64bit operating system, and
linux.inf
is for 32bit
operating system.
Make sure that the USB port (Type-C) is switched into USB network interface (please refer to
section 3.5, USB mode setting).
IP Address: 10.1.1.1
Username: admin
Password: admin
