Galaxy G2
- 32 -
Self-check:
Users can also do the self-check from this configuration page, click on the Check all
button to check all the modems or click on the check button corresponding to the modem to check
one by one.
Clean EPH:
Click this button to clear the remaining epochs to let recever track the satellites
better.
Factory Default:
Click this button to bring the receiver back to factory default setting.
Reboot:
Click this button to restart the receiver.
Power Off:
Click this button to power off the receiver.
System Setup
This page is used to control Voice prompt, volume of voice, power saving, USB mode and the
default language for receiver.
Voice Prompt:
Check on this box to turn on the voice guide for Galaxy G2, uncheck it to turn off
the voice guid.
V
oice Volume:
Define the voice volume for Galaxy G2’s speaker.
Power:
Configure the receiver to use the power saving mode or not.
USB:
This is used to configure Galaxy G2 what kind of USB mode output from 7-pin port when
connect the receiver with computer via USB cable. USB and network port for optional.
Default Language:
Configure the default language for Galaxy G2 which associates with voice
guid.
Note: This is not the language setup for web UI, the Web UI only supports Chinese and English.
TimeZone(h):
Use this to setup the corresponding time zone for your country or area.
