-4-
For Machines Mfd. Since 10/20
South Bend Tools
Model SB1093
I N T R O D U C T I O N
Belt Sander
H. Sanding Belt End Guard:
Protects against
accidental contact with end of sanding belt.
Guard swings open for contour sanding.
I. Sanding Belt Access Lock Knob (1 of 2):
Secures sanding belt access panel. Remove
lock knobs for belt access.
J. Back Stop:
Prevents workpiece from being
ejected from belt. Must be used when belt
sander is in horizontal position and table/
fence assembly is in fence configuration.
K. Indexing Pin:
Positive locking pin stops
belt sander tilt at 0° (vertical), 45°, and 90°
(horizontal).
L. Miter Gauge:
Used for miter sanding.
Adjustable from 60° left–60° right.
M. Sanding Belt Table:
Supports workpiece as
it is being moved back and forth against
sanding belt.
Note:
Table may also be configured to use
as a fence when belt sander is used in the
horizontal position.
N. Sanding Belt Tracking Lock Knob:
Loosen
lock knob to allow movement of sanding belt
tracking knob, tighten to lock tracking knob
in place.
O. Sanding Belt Tracking Knob:
Controls side-to-
side tracking of sanding belt.
P. Table Tilt Lock Knob:
Loosen lock knob to
adjust work table to desired angle.
Q. Sanding Belt Tension Knob:
Turns clockwise
to increase tension on sanding belt, turns
counter-clockwise to decrease tension.
Figure 5. Belt sander controls.
O
N
P
Figure 4. Belt sander features.
H
I
J
K
L
M
Q
