South Bend Tools
For Machines Mfd. Since 10/20
Model SB1093
-13-
P R E P A R A T I O N
Converting Voltage to
230V
The voltage conversion procedure consists of
replacing the magnetic switch, rewiring the
motor, and installing the correct plug. The
voltage conversion MUST be performed by an
electrician or qualified service personnel.
IMPORTANT:
If the diagram included on the
motor conflicts with this one, the motor may
have changed since the manual was printed. Use
the diagram provided on the motor junction box
instead.
To convert to 230V:
Items Needed
Qty
Phillips Head Screwdriver #2 ...............................1
Electrical Tape ...................................... As Needed
Wire Nut (14 AWG) ...............................................1
Wire Cutter/Stripper .............................................1
230V Magnetic Switch Assy (PSB1093216X) ......1
6-15 Plug ................................................................1
1.
DISCONNECT
MACHINE FROM POWER!
2.
Cut off existing 5-15 plug.
3.
Remove (2) M8-1.25 x 20 flange bolts located
above and below the power switch, remove
switch from inside cabinet (see
Figure 8
).
Figure 8. Magnetic switch mounting bolts.
Switch Bracket
Mounting Bolts
Figure 9. Magnetic switch assembly.
115V Magnetic
Switch
230V Magnetic
Switch
Switch
Mounting
Screws
4.
Remove (2) M4-.7 x 10 Phillips head screws
and separate magnetic switch from mounting
bracket (see
Figure 9
).
5.
Remove (2) M5-.8 x 12 Phillips head screws
from power cord plate, then feed plate and
power cord through opening into cabinet (see
Figure 10
).
Figure 10. Power cord plate.
Cord Plate
Mounting Screws
