◇
16
● SYSTEM
Press the key, and the corresponding key lights, display SYSTEM1 setting
interface;
It can be switched to SYSTEM2, SYSTEM3 and INTERFACE.
● MEMORY
Press the key in the SETUP page, and the corresponding key lights, the SAVE
window is used to save the currently edited test programm; while the LOAD
window is used to retrieve saved data, you can set the selected data as the default
scheme.
5.
Indicator
● DANGER
In the process of testing, it lights in output voltage.
● PASS
Indicate a test result, it lights in PASS;
When the time function is off (TIME OFF), no PASS judge.
● FAIL
Indicate a test result, it lights in FAIL.
6.
Direction key
Move direction key to the required setting test condition.
Press SHIFT and
to change LCD display contrast.
7.
Code switch
When in SETUP status, set the test condition on LCD.
8.
USB interface
Externally connect to USB storage
9.
Output voltage HIGH and RTN/LOW terminal
High and low voltage/return terminal in test voltage output.
！
Warning: In the process of testing, don’t touch the high terminal!
Caution: If external voltage is used in test terminal, it will cause damage to
internal circuit.
10. Shortcut key (F1-F5)
Corresponding with the function operation or shortcut key on LCD.
11. 8-channel sweep interface (only for ST9201S/SX)
Internal 8-channel sweep output interface.
12. POWER
