SoundCraft Ui24R User Manual Download Page 47

Page: 47 / 121

Ui24R User Manual

4.0:1 CHANNEL STRIP

CHANNEL STRIP

4.0:1 CHANNEL STRIP

The Channel Strip has a host of information right at your fingertips. The following is a breakdown of

what a user can expect to find.

VCA and Subgroup

indicators are displayed in

bottom RH corner when

activated.

When channel mute is

activated the gain meter is

displayed in blue.

Mute and Solo buttons when acti-

vated will either Mute the channel,

removing it from the mix or Solo it

by removing all other channels.

Channel Gain LED

indicators display gain

level. Peak levels are

displayed in Red.

Channels can be named

by double-clicking on

the channel number

VCA group information

is displayed top LH for

multiple VCA groupings

Stereo pairing when

activated will pair two

adjacent channels and

pan them left/right

Summary of Contents for Ui24R


























































































































Search results

Summary of Contents for Ui24R

Reviews:

Related manuals for Ui24R

Brands by name

Popular brands

SoundCraft Ui24R, User Manual

Search results

Summary of Contents for Ui24R

Reviews:

Related manuals for Ui24R

Brands by name

Popular brands