SoundCraft Ui24R User Manual Download Page 111

Page: 111 / 121

Ui24R User Manual

10.1.2: WI-FI

SETTINGS > NETWORK CONFIG > WI-FI

10.1.2: Wi-FI SETTINGS

Use the Save/Update button to save Wi-Fi settings.

IMPORTANT: You must recycle the Ui power (turn the unit off and on) for settings to take effect.

The Ui can connect to an existing Wi-Fi network / Hotspot, and you can access the control software via

the unit’s IP number (shown in Settings > Network). Select the Wi-Fi Configuration menu in Network

Config to edit the Wi-Fi settings.

Wi-Fi

Enabled / Disabled

Enable or disable the Wi-Fi connection.

SSID (Service Set Identifier)

Text Entry

This is the name of the network you wish to connect to.

Password

Text Entry

This is the password for the network you wish to connect to.

Master Password Protection

Address

DHCP / Manual

You can choose dynamic IP allocation, in which case the Ui will automatically allocate an IP, Netmask, and Gateway.

If you choose Manual IP allocation, you will need to complete these fields yourself. Please refer to your network

administrator for manual IP allocation.

Summary of Contents for Ui24R


























































































































Search results

Summary of Contents for Ui24R

Reviews:

Related manuals for Ui24R

Brands by name

Popular brands

SoundCraft Ui24R, User Manual

Search results

Summary of Contents for Ui24R

Reviews:

Related manuals for Ui24R

Brands by name

Popular brands