SoundCraft Ui24R User Manual Download Page 89

Page: 89 / 121

Ui24R User Manual

6.2: MOREME

MIX FEATURES > MOREME

6.2: MOREME

“MOREME” Portrait Mode ON/OFF

It is now possible to define whether MOREME is displayed automatically in portrait mode on devices

offering orientation support. Some users prefer to operate fader view pages (MIX, AUX, FX) in por

trait display orientation so the faders are “long throw”.

MOREME Modes:

MOREME ON - Portrait mode orientation will automatically display the MOREME page

MOREME OFF - Portrait mode orientation will display the regular GUI with extended faders. Some

features of the GUI display will be “grayed out” and restricted from view due to the dimension limita

tions.

Changing the MOREME Mode:

- Go to the SETTINGS-->SETTINGS tab page

- Set the MOREME PORTRAIT MODE option to ON/OFF

Summary of Contents for Ui24R


























































































































Search results

Summary of Contents for Ui24R

Reviews:

Related manuals for Ui24R

Brands by name

Popular brands

SoundCraft Ui24R, User Manual

Search results

Summary of Contents for Ui24R

Reviews:

Related manuals for Ui24R

Brands by name

Popular brands