2.2: HARDWARE I/O & CONTROL
GETTING STARTED > HARDWARE
2.2: Hardware I/O And Control
RESET
Recessed push switch used to reset the unit.
To reset Network settings ONLY, switch the unit on while holding down the reset button for at least ten sec-
onds. For a full system reset, see section 3.0.2.
FOOTSWITCH
Footswtich connector used to toggle selected configurations.
Use a footswitch with a quarter-inch jack connection. The unit will auto-detect the connector type, though
the footswitch itself must be a non-latching type. The SETTINGS page has a variety of functions that can be
assigned.
Side USB Connectors 1 & 2
May be used for Connecting Keyboard, Mouse and Touchscreen
There are USB connections on the front panel of the unit for audio recording and playback.
ETHERNET
Standard RJ45-wired connector for use with wired Ethernet.
A wired Ethernet conenction to the Ui is the most secure. See section 10.1 for more details on network set-
tings and configurations. By default the IP address is 10.10.2.1.
HDMI Connector
Supports HDMI Video standard
Complete Mixer Web Interface is displayed on HDMI screen. Please note if using DVI and VGA adaptors
they must be active. Performance will depend on other concurrent functions which are being used in the
mixer. (eg. while recording to USB MTK stick you may see a slow down in screen update)
Ui24R User Manual
PWR
Power Connector & Switch
The Ui mixer has an AC IC connection universal power supply. Use the power switch with the reset button
(other side panel) to reset the unit to factory default settings if required.
