manualshive.com logo in svg

Sound Devices MixPre-6M, User Manual, Page: 51 / 80

Share
Download
Sound Devices MixPre-6M User Manual Download Page 51

51

USB

USB Audio Interface

The MixPre-6M has an integrated 8-in, 4-out core audio-compatible interface for 

use with a Mac or PC computer.
For PC users, the MixPre-6M will appear as a 2x2 audio interface unless a 

specific ASIO

®

 driver is installed. The latest ASIO driver, along with install 

instructions, is available for free at 

www.sounddevices.com/support/downloads

. 

See the MixPre-6M’s Downloads page.
To work with the USB audio from a host computer, it is necessary to route the 

USB 1 - 4 sources appropriately. Should you want to mix the USB audio from 

the host computer with live audio from the MixPre-6M’s inputs to the LR bus, 

use the channel screen and select input source. 

The MixPre-6M is capable of recording and streaming audio to a USB host 

simultaneously. It is also capable of recording the USB audio stream out of a 

computer directly to its SD recorder. This is an amazingly useful feature for 

recording any computer-based audio. 

See the table below detailing the MixPre-6M’s channel to output assignments.

t

racks

usb o

utput

 a

ssIgNmeNt

Track 1

USB stream 1

Track 2

USB stream 2

Track 3

USB stream 3

Track 4

USB stream 4

Track 5

USB stream 5

Track 6

USB stream 6

Track 7

USB stream 7

Track 8

USB stream 8

Summary of Contents for MixPre-6M

















































































Reviews:

No comments