manualshive.com logo in svg

Sound Devices MixPre-6M, User Manual, Page: 5 / 80

Share
Download
Sound Devices MixPre-6M User Manual Download Page 5

5

Quick Start 

Multitrack Recording Step-by-Step

This Quick Start chapter is meant as a “step-by-step, how-to” reference for 

setting up the recorder and making music with the MixPre-6M right out of the 

box. 
For more information on features and steps mentioned in this procedure, refer 

to later chapters in this User Guide.

To begin multitrack recording:

1.  Connect power.

 

X

Provide at least one power source, either batteries (via included sled) 

or via USB-C. 

2.  Power up the MixPre.

 

X

Slide the power switch (left side panel) to On. The MixPre will boot and 

light up.

3.  Connect an audio source.

 

X

Connect an audio source, either a microphone, line or instrument line-

level signal to one of the input jacks on the side panels.

4.  Connect headphones.

 

X

Connect your preferred headphones to the headphone jack on the right 

side panel.

5.  Insert & Format Media  — Insert a Class 10 SD card into the slot on the 

rear of the MixPre.

(A) Tap 

. The Main menu appears with multiple pages of settings.

(B) Tap 

 (the Dots icon) to “page” through the sub-menu. 

 

L

The number of dots indicate the number of pages; the solid dot shows what page 

is displayed.

(C) Tap SD Card > Edit > Format. 

Summary of Contents for MixPre-6M

















































































Reviews:

No comments