Sound Devices 833 User Manual Download Page 105

Page: 105 / 123

To merge several folders or days into one sound report in SD-Remote, activate ‘Sibling Folders’. This will print all contents of all
folders at the same directory level as the current record folder creating a sound report.

Settings

SD-Remote Version

Displays the version number.

Connect Via

(Android Tablet)

Select whether to connect via USB or Bluetooth. If Bluetooth is selected, use the Connect Icon on the Meter views to connect to a
device.

Hide Faders

Turn On to hide faders in the Meter views. Faders are still available in the channel screen.

Meter View Arm Lock (Phone)

Enable to prevent accidental arming disarming in the Meter views. Track arming is still available in the channel screen.

File Transfer Mode

Touch to put the 8-Series into File Transfer Mode.

833

User Guide

105

Summary of Contents for 833




























































































































Search results

Summary of Contents for 833

Reviews:

Related manuals for 833

Brands by name

Popular brands

Sound Devices 833, User Manual

Search results

Summary of Contents for 833

Reviews:

Related manuals for 833

Brands by name

Popular brands