manualshive.com logo in svg

Sound Devices 833, User Manual

The Sound Devices 833 User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and insights on operating and maximizing the potential of your Sound Devices 833. Easily access the manual at manualshive.com, ensuring you have all the information you need at your fingertips.

Share
Download
background image

Mix Pan Mode.

For adjusting channel pans by rotating the VPots. Press a VPot to set pan to center. Faders, mutes and solos

continue to control the channel mix, mutes and solos.

Mix Low Cut Mode.

For adjusting channel low cut frequency by rotating the VPots. Press a VPot to toggle Low Cut On/Off. Faders,

mutes and solos continue to control the channel mix, mutes and solos.

Bus Mode

. For adjusting Bus levels B1-B4, L,R. Switches faders to Bus faders. Mutes and Solos buttons are Bus mutes and solos

respectively.

Bus Sends-on-Faders Mode.

Faders are channel sends to the selected bus. Ideal for creating different IFB feeds/mixes.

Channel Bus Sends Mode.

VPots adjust a channel’s send gains to each bus. Press VPot to toggle between Off, Pre, Post and

Send. Rotate VPot to adjust bus send gain. Use the Select buttons to select which channel’s send gains to adjust.

Output Mode.

For adjusting Output levels X1-X4, L,R. Switches faders to Output level controls. Mute buttons are output mutes.

EQ Mode.

For adjusting channel EQ using the VPots. Use the Select buttons to select which channel’s EQ to adjust. Faders

continue to control the channel mix.

Supported Third-Party Controllers

The 833 supports a variety of third-party external controllers that conform to the MCU protocol. Multiple controllers may be
connected simultaneously for extended control.

SONOSAX SX-LC8+

Eight channel compact fader bank with faders and channel selects for channels 1-8 plus controls for slate mic, record, and stop. The
Mic, Rec, and Stop buttons are mappable to other functions using the Mapping menu.

Ensure the Sonosax is set to USB Midi mode

1.

Press and hold buttons 6 + 7 + 8 and connect the USB cable to the 8-Series USB-A port. The mode change is confirmed
by a blinking REC

2.

Reboot the 8-Series.

Icon Platform M+ and D2 Display

Eight channel fader bank with control over gain, bus, sends, coms, trim and pan. Dedicated Select, Mute, Solo and Arm buttons for
each channel. Bank switch between 833 channels 1-8 and 9-12 if the +4 plugin is installed. Icon M+

Operation is covered in the

Icon M+ User Guide:

https://cdn.sounddevices.com/wp-content/uploads/2019/05/Icon-User-Guide.pdf

Icon Platform X+

Eight channel expansion fader bank with single assignable knob and Select, Mute, Solo and Arm buttons.

Icon Platform B+

Assignable illuminated 50 pad button surface. Allows a user to custom map up to 50 functions.
Connects via USB-A cable, not mini DIN.

Behringer X-Touch

Eight channel trim and fader panel with master volume and additional mappable buttons. Bank switch between 833 channels 1-8
and 9-12 if the +4 plugin is installed.

Mackie MCU Pro

Eight channel trim and fader panel with master volume and additional mappable buttons. Bank switch between 833 channels 1-8
and 9-12 if the +4 plugin is installed.

Waves MidiPlus Fit

Sixteen channel trim and fader panel with main fader and additional mappable buttons. Note that the Waves MidiPlus Fit must be
running firmware v1.1.3 or later and set to MCU mode. To enter MCU mode, hold down the ‘Solo’ button of channel 1 and the ‘2’
button of channel 2 simultaneously while turning on the FIT.

Refer to the ‘Waves MidiPlus Fit Controller for the 8-Series - User Reference’ for more information.

833

User Guide

84

Summary of Contents for 833




























































































































Reviews:

No comments

Related manuals for 833

Nady Audio ASM-2 User Manual preview
ASM-2
Brand: Nady Audio Pages: 2
PASCO SF-9500A Instruction Sheet preview
SF-9500A
Brand: PASCO Pages: 2
Observator Instruments Analite NEP-5000 Manual preview
Analite NEP-5000
Brand: Observator Instruments Pages: 103
Behringer EUROGRAND EG2080 User Manual preview
EUROGRAND EG2080
Brand: Behringer Pages: 34
Endress+Hauser Proline Promag 10D Technical Information preview
Proline Promag 10D
Brand: Endress+Hauser Pages: 28
Oceanic DATATRANS Owner'S Manual preview
DATATRANS
Brand: Oceanic Pages: 114
Factair Safe-Air F8100 Operating Manual preview
Safe-Air F8100
Brand: Factair Pages: 38
A&D HP-04 Instruction Manual preview
HP-04
Brand: A&D Pages: 23
B meters HYDRODIGIT Operating Instructions Manual preview
HYDRODIGIT
Brand: B meters Pages: 30
Techcomp UV 2600 Instruction Manual preview
UV 2600
Brand: Techcomp Pages: 51
Sonel MRU-30 User Manual preview
MRU-30
Brand: Sonel Pages: 56
Xylem mjk MagFlux Quick Start Manual preview
mjk MagFlux
Brand: Xylem Pages: 2
X-IO x-IMU3 User Manual preview
x-IMU3
Brand: X-IO Pages: 58
All-sun EM3610 User Manual preview
EM3610
Brand: All-sun Pages: 11
Keysight E8740A-020 Startup Manual preview
E8740A-020
Brand: Keysight Pages: 41
NIEUWKOOP PH1210 User Manual preview
PH1210
Brand: NIEUWKOOP Pages: 18
Phonak Ear-Gauge User Manual preview
Ear-Gauge
Brand: Phonak Pages: 2
Landtek PH-ORP 2000 Quick Start Manual preview
PH-ORP 2000
Brand: Landtek Pages: 3

Brands by name

Popular brands

Load more brands