Sound Devices 833 User Manual Download Page 53 | Manualshive

Page: 53 / 123

background image

SuperSlot

When combined with 833, the SL-2 wireless accessory offers integrated control of SuperSlot compatible receivers, monitoring,
powering, and RF distribution for multiple channels of wireless audio. Selecting the SuperSlot menu item (or shortcut Meter+HP)
navigates directly to the Rx Overview screen.
See SL-2 Receiver Overview for more details.
The SuperSlot menu is grayed out and inaccessible unless a Sound Devices SL-2 Dual SuperSlot Wireless Module is attached to
the 833.

The SL-2 Receiver Slot Power or the 8-Series power must be cycled after performing any action that causes a receiver to reboot.
Powering receivers on and off from the receiver’s user interface is not supported.

SL-2

The SL-2 is a two slot-in wireless receiver integration system that easily mounts to the top panel of any 8-Series mixer-recorder. It
accepts UniSlot and SuperSlot™ wireless receivers from a variety of manufacturers. Power to the SL-2 and receivers is supplied by
the 8-Series mixer-recorder – no external DC connector is needed on the SL-2. Analog or digital audio is sent from the receivers into
the mixer-recorder via the expansion port, reducing messy cabling for power and audio connectivity.

The SL-2 offers antenna distribution to slot-in receivers, spreading out the placement of antennas for better RF performance.
Additionally the SL-2 allows for control of smart antennas and includes two filtered antenna outputs to external receivers via MCX
ports. The rear panel of the SL-2 is equipped with two TA3 connectors for an additional four inputs of AES3 audio and two 4-pin
Hirose DC Outputs, each supplying up to 500 mA.

Up to eight channels of audio can be routed from the SL-2 to the 833. The eight channels can be comprised of audio from dual or
quad channel slot in receivers and/or the four AES inputs.

The SL-2 mounts to the 833 via the multi-pin expansion port located on the top panel. Please refer to the SL-2 User Guide for panel
descriptions and installation instructions.

WARNING! To avoid potential hardware damage, turn off power to the SL-2 slot prior to removing and inserting receivers. Slot
power can be turned off in Menu>System>Expansion Port, Menu>SuperSlot>Options>Slot Power, or by powering off the 8-Series
Mixer-Recorder.

833

User Guide

53

«
...
51
52
53
54
55
...
»

Summary of Contents for 833




























































































































Reviews:

No comments

Related manuals for 833

PLATINUM Series

Brand: Hach Pages: 64

Brand: Sensia Pages: 16

Brand: MULTISPAN Pages: 2

Brand: Fly Henry Pages: 5

Brand: Sper scientific Pages: 56

Brand: KALATEL Pages: 38

Micropilot S FMR533

Brand: E+H Pages: 12

Brand: National Instruments Pages: 169

Brand: Konica Minolta Pages: 92

Brand: Reed Instruments Pages: 12

Brand: Orange Research Pages: 2

Brand: Sub Aqua Pages: 4

Brand: PTC Instruments Pages: 2

KS-PH-221-DELUXE

Brand: Kensington Pages: 14

Brand: Delmhorst Pages: 9

Brand: Micronics Pages: 36

Brand: Teledyne Pages: 79

Brand: Lasertec Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands