USE AND MAINTENANCE MANUAL
MANUAL DOUGH SHEETER
Mod. SPT0/1-E - SPT3/1-E
Code
3529.0031.01
Revision A
date 06/09/2011
10
Technical Assistance Service - Phone (+39) 0445.595.111
Arc. 86
Inside the packing is located the 2 table supports. The assembly of
these supports is very easy.
Once the table is assembled, it is necessary to keep it up to mount the
supports.
The supporting leg has to be hanged inside the porthole as indicated in
the side picture
Revolve lightly the leg and lift it up till the screws on the table,
unscrew the screws and fix them with the leg ends as indicated
on the side picture.
Photo 6
The table ends are fitted with 2 belt ties Le estremità del piano
sono dotate di una coppia di tirannti tappeto che servono anche
da appoggio per i piani. Come indicato nella foto a lato con il
mumero 6.
Photo 7
Unscrew the 2 screws indicated on point 7, revolve all the group
(the 2 legs and the free wheel) until the position indicated on side
picture, then screw back again the screw 7 as previous position
tightening the belt.
Now the table is completely assembled, proceed on the same
way to assemble to opposite one. To unpack completely the
machine, it is necessary to open the 2 side doors; inside the
basement is fixed to the pallets by 4 screws. Remove the screws
to take off the machine
Photo 8
