USE AND MAINTENANCE MANUAL
MANUAL DOUGH SHEETER
Mod. SPT0/1-E - SPT3/1-E
Code
3529.0031.01
Revision A
date 06/09/2011
6
Technical Assistance Service - Phone (+39) 0445.595.111
Arc. 86
1.2 GENERAL WARNINGS AND APPLICATION
The aim of this manual is:
−
To facilitate understanding and operation of the machine and enable the system to be used to
its full technical potential.
−
To provide instructions for the most effective and rational maintenance and help the operator to
understand any faults and how to remedy them.
−
To warn against risks inherent in use of the machine due to failure to observe the safety
regulations.
−
To indicate working limits for maintaining hygiene and environmental conditions and to ensure
health at work.
These pages must be read carefully before starting the machine.
This manual forms an integral part of the product; it must be kept near the machine for prompt
easy consultation and must also be kept for future reference until the machine is scrapped.
The manufacturer does not guarantee the technical-legal suitability of the installation premises and
machine supporting services but provides all instructions for correct installation in the relevant
section of this manual.
For the above, the user is advised to contact an expert professional technician, also for
compliance with any local laws or regulations.
•
The machine is designed for the food industry.
It is a machine designed for sheeting of dough obtained with different types of ingredients like
flour, water, sugar, fat, butter, salt, yeast, etc. and of medium consistency for cake-making in
general.
•
The machine must be used only for the purpose for which it has been designed. All other uses
are considered inappropriate and therefore unreasonable.
The manufacturer cannot be held liable for incorrect use, inappropriate and/or
unreasonable acts.
The manufacturer cannot be held liable for any damage caused by inappropriate, incorrect or
unreasonable use, for example:
−
inappropriate use by non-trained personnel;
−
non-authorised modifications or work on the machine;
−
use of non-original spare parts or parts not specific for the model;
−
failure to follow the instructions, even partially.
