USE AND MAINTENANCE MANUAL
MANUAL DOUGH SHEETER
Mod. SPT0/1-E - SPT3/1-E
Code
3529.0031.01
Revision A
date
06/09/2011
Arc. 86
Technical Assistance Service - Phone (+39) 0445.595.111
9
1.5 ASSEMBLY
The machine is delivered on a pallet and wrapped with plastic. In order to
assure a safe transportation, the working tables are diassembled and the
basement is fixed with 4 screws.
It is necessary to take off the plastic carefully in order to avoid the tables
or other compounds to fall down.
On the picture is indicated with number 1 a shaft located behind the
tables which has to be used as table support. Unscrew the screw nr.2 to
release the shaft and turn round the plate nr 3. This operation has to be
done on both sides of the machine.
Be carefull not to loose the 2 white plastic rings on the shaft 1
Photo 3
the shaft will be hanged on the table from side to side.
The 2 white rings are mounted on each end of the shaft
Photo 4
Now the table will be hoisted in order to replace the shaft on its
seat, then it is necessari to block it with the plate nr 3 and fix the
plate with the scre as indicated on number 2 on the side picture
Photo 5
