Sortimo ProCargo CT1, Operating Instructions Manual

Page: 30 / 33

58 59
9. Liability for defects
In most European countries a 24-month warranty is stipulated by law, beginning
on the day of purchase.
The original invoice must be submitted for the defect liability claim.
You are entitled to the warranty under the following conditions:
• There is a manufacturing defect, material defect or information error.
• The damage referred to in the complaint was already present at the time
of delivery.
• The product was not altered due to function-related wear or ageing.
• The damage was not caused by violation of the intended use.
• Battery: this exhibits a residual capacity of less than 60% of the nominal
capacity within two years (from the date of purchase) and a maximum
500 load cycles.
a charge cycle is complete charging of the battery with a single charge
or several partial charges (e.g. two half charges).
The warranty does not include:
• All wear parts according to the list of wear parts, unless they are
production or material defects
• Damage caused by improper use
• Damage caused by failure to observe the procedures described in
the „Maintenance“ section
• Damage caused by improper repair tools and insufficient care
• Damage caused by the use of used parts
• Damage caused by subsequent mounting of non-standard equipment
and technical modifications
Liability for defects
10. EC Declaration of Conformity
EC Declaration of Conformity
-
Translation-
EC declaration of conformity
HNF GmbH
Bahnhofstraße 150
16359 Biesenthal
HNF GmbH declares that the machine
Pro Cargo CT1
a Pedelec, meets all relevant provisions of Machinery Directive 2006/42/EC.
Furthermore, the machine complies with the following directive:
•
Directive of Electromagnetic compatibility 2014/30/EC
The following other technical standards have been applied :
•
DIN EN 15194
:2017, Cycles - Electrically power assisted cycles - EPAC
•
DIN EN ISO 4210: part 1-9, Cycles - Safety requirements for bicycles
• EDIN 79010:2017, Bicycles - Transportation bikes and Cargo Bikes
Document assignee:
Joachim Osten, Bahnhofstraße 150, 16359 Biesenthal, Germany
HNF GmbH
Biesenthal,
19.07.2018
__________________________ _____________________________
Kalle Nicolai / CTO Benjamin Börries / CEO