Page 22 of 60
User manual Kika
3.7 Back angle
To alter the back angle, it suffices to fold down
the release lever (pos. 1) so the bolts (A) will
loosen from the locking plate (B). Keep the
lever in the released position until you have
adjusted the desired angle on the row of holes
of the locking plate. Then simply let go of the
lever so the bolts will snap into their holes.
PLEASE NOTE
Please check the condition of the strings for
abrasion regularly and replace them if
necessary!
1
ATTENTION
After each back angle adjustment, make sure
that BOTH bolts are firmly snapped into their
holes!
3.8 Side guard, clothing guard
Kika’s side guards and clothing guard are
preadjusted in relation to its wheel size, so no
further adjustments need to be done.
The lever for the locking brake is integrated
into the clothing guard.
3.9 Arm pads (optional)
The arm pads, too, are firmly screwed onto
the side guards so no further adjustments
need to be done.
3.10 Adjustment of caster
and rear wheel
Because of its firm wheel base, Kika is free
of adjustments concerning the caster–rear
wheel–constellation.
1
Summary of Contents for kika
Page 1: ......
Page 2: ......
Page 55: ...User manual Kika Page 55 von 60 Room for notes e g for constructional changes etc...
