User manual Kika
Page 19 von 60
X
3.3 Centre of gravity
You may change the centre of gravity of the
wheelchair (X) by moving the seat plate (pos. 2)
in relation to the seat carrier part. When
leaving our factory, the wheelchair is
preadjusted into a tipping stable position. The
further back the seat is mounted, the more the
wheelchair tends to tip backwards. However, it
may also be tilted back on 2 wheels more
easily. This facilitates, for experienced
wheelchair users, to quickly and easily
surmount obstacles, as the wheelchair’s agility
is effectively improved.
1
ATTENTION
Even if the anti-tipper is activated and there is
actually no danger, a beginner may be
unsettled or even demotivated if the
wheelchair’s adjustments make it too prone to
tipping!
1
ATTENTION
Please work carefully, gradually, and only with
the aid of an experienced assistant towards
the maximum degree of tipping proneness
desired for by the user! Read the SAFETY
INSTRUCTIONS carefully. (p. 8 Fehler!
Verweisquelle konnte nicht gefunden
werden.ff).
•
loosen screws (pos. 1) and place seat
(pos. 2) into desired position
•
retighten screws firmly
•
test new adjustments with the securing
support of an assistant!
Summary of Contents for kika
Page 1: ......
Page 2: ......
Page 55: ...User manual Kika Page 55 von 60 Room for notes e g for constructional changes etc...
