Page 20 of 60
User manual Kika
3.4 Back height
In order to provide as much moving space as
possible for the arms when driving the
wheelchair, the active driver’s back height
should generally reach to the bottom line of the
scapulae.
The upper edge of our firm moulded backs is
pulled up by approx. 5 cm in model 3 (and
approx. 2 cm in model 1). Thus a longer
support of the spine is achieved. Thanks to the
curved upper edge of the back sheet plate,
however, the scapulae can still be moved
freely. The back height may be increased by
2.5 cm without any additional parts.
Extension of back height
•
remove all 6 screw joints (pos. 1) on the
seat support angle of the back sheet plate
(A)
•
mount moulded back into new position
•
tighten screw joints firmly
•
readjust or replace the string which
activates the back angle adjustment (pos.
2) if necessary
1
2
Summary of Contents for kika
Page 1: ......
Page 2: ......
Page 55: ...User manual Kika Page 55 von 60 Room for notes e g for constructional changes etc...
