SORG kika User Manual Download Page 17

Page: 17 / 60

User manual Kika

Page 17 von 60

3.1.3. Leg support with support

pad (optional)

If you choose a leg support with support pad,

the opposite side is supplemented with a
divided swing-up leg support. The side with the
pad does not have a foot rest!

Adjustment of the support pad

•

loosen the clamping lever (pos. 1) on the
lower side of the pad

•

choose desired position on the axle plate

(A)

•

tighten clamping lever (pos. 1) firmly

Swinging up the leg support

•

loosen clamping lever (pos. 2)

•

place leg support into desired position

•

tighten clamping lever (pos. 2) firmly

Angle adjustment of the support pad

•

loosen screw joint (B)

•

adjust desired angle

•

tighten screw joint

ATTENTION

Please make sure to turn away the grip parts of

the clamping levers (pos. 2) backwards so they
cannot injure or inhibit your child.

PLEASE NOTE

If your wheelchair is equipped with support

pads on both sides, please conduct

adjustments analogically.

Summary of Contents for kika





























































Search results

Summary of Contents for kika

Reviews:

Related manuals for kika

Brands by name

Popular brands

SORG kika, User Manual

Search results

Summary of Contents for kika

Reviews:

Related manuals for kika

Brands by name

Popular brands