Page 26 of 60
User manual Kika
1
3.12 Anti-tippers
The anti-tippers prevent your wheelchair
tipping backwards unintentionally. Correct
adjustments are hence very important for the
function of the anti-tipper. The correct distance
to the ground is 2-5 cm.
1
ATTENTION
Please also read the respective chapters 2 of
the SAFETY INSTRUCTIONS.
Adjustment of distance to the ground
•
measure current distance between the
anti-tipper and the ground
•
remove rear wheels
•
remove screw joints (pos. 1) completely
and insert them into suitable bores
•
retighten screw joints according to
instructions with the necessary moment of
force
•
check distance to the ground
•
test function with securing support of an
assistant
When exchanging the springs (A),
please proceed in the same manner.
Further adjustments can be done via the small
wheel at the back of the anti-tipper.
•
loosen screws (pos. 2) on both sides
•
remove screws (pos. 3)
•
choose among the three holes and insert
screws
•
retighten all screws
1
ATTENTION
Make sure to make the same changes of the
anti-tippers on both sides!
1
2
3
A
Summary of Contents for kika
Page 1: ......
Page 2: ......
Page 55: ...User manual Kika Page 55 von 60 Room for notes e g for constructional changes etc...
