Instructions for use Airon
Instructions for use Airon
33 of 36
2021-06-10
5 Technical specifications
Airon
5.1 Data and measurements
Model: Airon
Type: 792
Aid directory number: 18.50.03.6XXX
All dimensions ± 5%
Title
Measurement Comment
Seat width (SW)
in 20 mm steps
320-500 mm
grows wit the user 20 mm from each seat width
Seat depth (SD)
in 20-mm-steps
320-500 mm
3 x 100 mm growing with the user from every
seat width
Backheight (BH)
in 25-mm-steps
250-500 mm
Growing with the user to a maximum of 25 mm
from any height
Upper edge seat to up-
per edge footplate
300-325 mm
355-520 mm
The lower leg length results from the distance
from: upper edge seat to upper edge foot-
plate PLUS thickness of the seat cushion
Back angle
74°-118°
depending on the equipment
Lower leg length
190-520 mm
depending on the equipment
Seat angle
0 - 10°
Frame length 1
ST 32-38
480 mm
pure frame length measured without push
handles, molded back unit, wheels or footpla-
te
Frame length 2
ST 40-46
600 mm
Frame length 3
ST 48-50
660 mm
ETRTO wheel size 22“
25 - 489
Commercially available pneumatic tires in
sizes 1 "(25.4mm), 1 3/8" (35mm) - sizes 355
mm (20 "), 451 mm (22"), 540 mm, (24 "). All
solid tires in the mentioned dimensions
ETRTO wheel size 24“
25 - 540
ETRTO wheel size 25“
25 - 559
hand rim size
at 22“
Ø max. 481 mm
hand rim size
at 24“
Ø max. 538 mm
hand rim size
at 25“
Ø 565 mm
Diameter hand rim
Ø 19 mm
Pipe diameter
camber
1°, 3°, 5°, 7°
With drum brake wheels
seat height (SH) front
min.
380 mm
The seat heights are measured from the top
edge of the seat to the floor, WITHOUT the
seat cushion
seat height (SH) front
max.
560 mm
seat height (SH) back
min.
365 mm
seat height (SH) back
max.
510 mm
Width wheelchair
absolutely
min.
SB + 200 mm
With the smallest or largest wheel camber
max.
SB + 405 mm
Length wheelchair
absolutely
min.
min. 835 mm
Correspondingly longer with outdoor-front
end.
max.
max. 970 mm
Height wheelchair
absolutely
with standard push
handles
min. 750 mm
max. 1120 mm
with height adjustable
push handles
max. 1055 mm
max. 1320 mm
Permissible incline
12,3% = 7°
Permissible slope
12,3% = 7°
Security against tipping
12,3% = 7°
Turning circle
approx. 1000 mm depending on the wheelchair size
load capacity (max.)/
Weight test dummy
120 kg
Empty weight, roadwor-
thy 10.9 kg for:
Frame SW / SD 32/32, drive wheels 22 ", caster wheels 4" PU, continuous leg rests, seat and
back upholstery, side panels
Individual weights
drive wheels
0,97 – 2 kg
Depending on the size and equipment
frame
8 kg
Tyres
Commercially available pneumatic tires, sizes 1 ", 1 3/8" or solid (same dimensions), tire infla
-
tion pressure usually 3-10 bar
Service life
3 years
with not excessive use
Lifespan
5 years
Normative requirements
The wheelchair meets the requirements of ISO 7176-8 and the requirements against
ignition
